60" x 7.00" x 40,000# Paxson / Braner Slitting Line

Driven Loop / Injector Head 

Material Processed:                     CR, Galv. Aluminum & Painted 
Maximum Entry Width:                    60"
Maximum Entry Weight:                   40,000 lbs.
Maximum Exit Weight:                    45,000 lbs.
Coil ID Range Entry:                    20" to 24" 
Coil ID Range Exit:                     20" to 24" 
Line Speed:                             80 - 700 FPM (Coil Build-Up Mode)
                                        190 FPM (Bare Drum Speed)
Line Direction:                         Uncoiler: Left to Right 
                                        Recoiler: Right to Left

Consisting of the following:

-Entry L Type Coil Car: Paxson
  51" Wide Bed
  72" O.D. Capacity
  4" Dia. Camrols
  8" Bore Hyd. Lift Cylinder
  Approx. 18" Lift
  Self-Contained Hydraulics 
    Baldor 5 HP AC Motor, 208/220/440 V
  Hand Pendant Control
  Retractable Cable Reel 
  Approx. 12" from Floor to bottom of "V" Cradle
  Overall Size: 86" L x 56" W x 60" High

-Mandrel Type Uncoiler: Warner Swasey 
  40,000# x 72" Capacity
  78" Face Width Pumpkin Tooth Mandrel 
  20" - 24" Expansion Range 
  Hydraulic Expansion
  Sliding Base 
  Attached Holddown Roll 
  Water Cooled Brake 
  Line Direction: Left to Right

-Peeler Table:

-(2) Slitter Heads: Paxson
  Injection Head Design
  7.00" Dia. x 62" Face Arbors 
  Entry Side Guides
  100 HP DC Motor, 850/1750 RPM, 500 V
  In-Line Reducer w/5.952:1 Ratio

-Tension Stand: Mico
  60" Wide Combination Pad and Roll Type
  Roll Stand is a Quick Change Style
  Entry Separator Tooling Shaft
    Cartridge Type
  Drag Type Tension Unit w/Air Bladder
    Alligator Type, Air Cylinder Open/Close
  (2) - 16" Dia. x 66" Face Urethane Coated Rolls 
  Hydraulic Motor Threading Drive
  (2) Eaton 214WCB Water Cooled Brakes 
  Exit Hydraulic Crop Shear
    66" Face 4 Sided Blades
  65" Pass Line
  Overall Size: 150" L x 77" W x 128" High
                23,000 lbs.

-(2) Scrap Winders:
   Approx. 13" W x 32" Dia. Scrap Ball Capacity
   Hydraulic Motor Driven
   Powered Scrap Dump
   Oscillate Wind

-Recoiler: Paxson
  45,000# x 60" Capacity (with Outboard Support)
  S/N: 11349-7-8
  20" Dia. x 66" Face Drum w/24" pads
  Powered Clamp and Expansion
  Overarm Separator 
  Hydraulic Pushoff 
  150 HP Main Motor, 850/2000 RPM
  Main Gear Box w/5:1 Ratio
  Secondary Reducer w/10.8:1 Ratio
  Passline: 48" from Floor to center of Drum

-Outboard Bearing Support:

-Exit L Type Coil Car: Braner
  72.5" Wide Bed
  72" O.D. Capacity
  5" Dia. Camrols
  8" Bore Hyd. Lift Cylinder
  Approx. 20" Lift
  Self-Contained Hydraulics 
  Pushbutton Controls
  Gleason Retractable Cable Reel 
  Approx. 16" from Floor to bottom of "V" Cradle
  Overall Size: 80" L x 78" W x 54" High

-Less Electrics:

-Removed and in storage: Toledo, OH.


PRICE....................: USD  325,000