8.5" x 1.25" x 1,000# Ruesch Slitting Line

Brand
RUESCH

Model
RA1512

Stock #
2524

Condition
Not specified

Year

Location
Toledo, Ohio
United States

Specifications

Equipped With

-Thickness Range:       0.0005" to 0.020" 
-Speed:                 300 FPM Max. 
-Line Direction:        Right to Left 
 
Consisting of the following:
 
-Uncoiler: Rapid-Air
  Model:  RA1512
  1,500# x 12" Capacity
  Manual Link-Type Expansion 
  14" - 22" Expansion Range
  Powered by 1/2 HP AC Motor, 115 V, 1 Ph.
  Loop Control Arm 
  6 Coil Keepers
  48" Coil O.D. Capacity
  Passline: 33" from Floor to Center of Mandrel
  Overall Size: 43" L x 40" W x 57" High
                675 Lbs.
 
-Ruesch Slitter Head:
  8.5" Wide x 1.25" Dia. Arbors
  (2) entry tables with edge guides
    manual width adjustment from both sides
  Steel Stripper Ring Assembly 
  Burr Masher at Exit 
  Independent Arbor Adj.
  5 HP DC Motor - 2500 RPM 
  Reliance R.A. Reducer w/6:1 Ratio 
 
-Tooling, complete sets of spacers and stripper rings
  Approx. Knife count:
   -10 x 0.6805" w   -20 x 0.4835" w
   -14 x 0.6245" w   -14 x 0.4685" w
   -16 x 0.5925" w   -16 x 0.4055" w
   -18 x 0.5630" w   -15 x 0.3115" w
   -10 x 0.2245" w   -13 x 0.2170" w
   -20 x 0.1865" w   -6  x 0.1690" w
   -13 x 0.1560" w   -23 x 0.1385" w
   -12 x 0.1200" w
 
-Integral Recoiler Base:
  Scrap Winder, 10" Wide x 6" ID & 12" OD Ball Capacity 
  Air Brake for Tension Control 
  Driven by Chain from Slitter Head 
  2 Rewind Shafts, 2" Diameter 
  1 Recoiler Drum - Solid Drum, 6" Dia. x 17" Face
  1 Recoiler Drum - Solid Drum, 6" Dia. x 11" Face
  3" ID x 11.5" OD x 17" total length of micarta discs 1" to 3" wide each
  12" ID keeper rings
  6" ID keeper rings