72" x 7.00" x 55,000# Delta / Cincinnati Slitting Line

Not Specified


Stock #



Toledo, Ohio
United States


Max Width of Workpiece 72 inches

Equipped With

-Entry Coil Car:  Delta
  "L" Type
  72" O.D. Capacity
  5" Dia. Camrolls
  Self-Contained Hydraulics
-Uncoiler:  Delta
  Model UN 346
  78" Face Mandrel
  Hydraulic Expansion, 18" - 24"
  Pumpkin Tooth Mandrel
  Snubber Roll with Hydraulic Drive Motor
  Wichita Water Cooled Brake
  5 HP AC Motor Threading Drive
  Sliding Base with 8" Travel
  Max. Speed 500 FPM Constant
-Peeler Table:
  Hydraulic Cylinder Operated
  Powered Up/Down and In/Out Movement
-Driven Pinch Rolls:
  84" Face Rolls
  Hydraulic Cylinder Loaded
-Entry Side Guides:
  Powered Adjustment by Hydraulic Motor
-Entry Crop Shear:
  0.187" Capacity Zip Shear
  Hydraulic Cylinder Actuated
-Slitter Heads:  Cincinnati
  Two Drop in Heads
  7" Dia. Arbors w/Jet Nuts
  Outboard Bearing travels in over the arbors to 36" Wide
  100 HP GE DC Motor, 500/2000 RPM, 500 V
  Note: Second Head has had arbor shafts reworked and
        waiting for reassembly.
-(2) Scrap Winders:
  Hydraulic Motor Driven
  Hyd. Open/Close
  Oscillate Wind
-Threading Table:
  Hydraulic Cylinder Operated
-Pit Table:
  10' Long Table
  Hydraulic Cylinder Operated
-Drag Tension Stand:
  Entry Separator Tooling Bar
  10" Wide Boards with Felt Pads
  (3) - 5" Bore Air Cylinders for Clamping Pressure
-Driven Pinch Rolls:
  Hydraulic Motor Powered
  Rubber Covered Rolls
-Precision Leveler:  Delta
  19 Rolls, 9 over 10 Configuration
  2.18" Dia. Work Rolls
  7 Flights of Wedge operated Backups
  5 Flights Adjustable with Digital Readout Screen and Joy Stick Controls
  Spare set of rolls ground and in crate (2.16" Dia.)
-Exit Tach Rolls:
  5" Dia. x 84" Face Rolls, Rubber Covered
  (Spare Rolls still paper wrapped)
-Exit Crop Shear:
  0.187" Capacity Zip Shear
  Hydraulic Cylinder Actuated
-Threading Table:
  Lift and Extend Style
  Hydraulic Cylinder Operated
-Recoiler:  Delta
  Model RC 3322
  20" Dia. x 85" Face Drum
  Bolt on Pads for 24" I.D.
  Manual Grip and Expansion
  Hydraulic Pushoff
  Overarm Separator w/4.5" Dia. x 84" Tooling Bar
    10" Bore Air Cylinder Lift
  300 HP Reliance DC Motor, 300/1500 RPM, 500 V
  Alton Gear Reducer, Rated at 500 HP w/2.21 Serv. Factor,
    Reduction Ratio 11.33:1
  Digital Controls
-Exit Coil Car:
  "L" Style
  79" Wide Platform
  Coil Stabilizer Arms
  Self-Contained Hydraulics
-Exit Turnstile:
  3 C-Hook Type Arms
  Powered Rotation
  Hydraulic Pushoff
  2 Full Sets of Tooling
-Line Direction:  Left to Right
-Installed and Under Power