54" x 6.00" x 20,000# Braner Slitting Line

Brand
BRANER

Model

Stock #
2061

Condition
Used

Year
1983

Location
Toledo, Ohio
United States

Specifications

Max Width of Workpiece 54 inches
Max Thickness of Workpiece (in.) .120 inches

Equipped With

Material:           CR, Mild Steel
Coil Weight:        20,000 Lbs
Material Thickness: 0.012" - 0.120"
Maximum Coil Width: 54"
 
Slitting Capacity: 20 cuts of 0.018"
                   20 cuts of 0.048"
                   7 - 8 cuts of 0.090"
                   3 - 4 cuts of 0.120"
 
Consisting of the following:
 
-Entry Coil Car:
  Above Floor Type
  48" Wide Bed
  72" O.D. capacity
  Approx. 12" from Floor to bottom of "V" Cradle
  3 HP Self-Contained Hydraulics 
  7" Bore x 20" Stroke Hydraulic Lift Cylinder
  5" Dia. McGill Camrols
  Cable Reel
  Hand Pendant Control
  Overall Size: 82" L x 58" W x 50" High
 
-Uncoiler:
  Hydraulic Expansion
  20" - 24" Coil I.D.
  4 Segment Mandrel, 57" Face Width
  Powered Holddown Roll, 50" W x 6" Dia. Steel Roll
  68" O.D. Capacity
  Hydraulic Motor Threading Drive
  Sliding Base
  Wichita Water Cooled Brake
  Passline: 41" from Floor to center of Mandrel
  Overall Size: 167" L x 54" W x 74" High
 
-Peeler Table:
  6" Dia. x 58" Face Rolls
  Hydraulic Cylinder Up/Down, In/Out
 
-Entry Pinch Rolls:
  Bottom Roll Driven by Hydraulic Motor
 
-Entry Side Guides:
  Manual Adjustment
 
-Slitter Head:
  6" Dia. x 56.5" Face Arbors
  Jet Nuts
  Parallel Arbor Adjustment
  Knife Diameter Range: 9" - 11"
  5 HP AC Motor Threading Drive
    1740 RPM, 230/460 V
    Foote Jones Reducer W/105.9:1 Ratio
  Passline: 45.5"
  Overall Size: 140" L x 64" W x 77" High
 
-Scrap Chopper: Yoder
  7.5 HP AC Motor Driven
    1745 RPM, 208-230/460 V
  Overall Size: 98" L x 26" W x 34" High
 
-Scrap Conveyor: Livonia Magnetics
  0.5 HP AC Motor Thru Reducer, 1725 RPM, 230/460 V
  Overall Size: 140" L x 26" W x 49" High
 
-Recoiler:
  20" Diameter x 64" Face Drum
  Powered Clamp and Expansion
  Hydraulic Pushoff
  Overarm Separator
  72" O.D. Capacity
  50 HP CMC DC Motor, 1750 RPM, 500 V
  Reducer W/43:1 Ratio
  Passline: 42" From Floor to center of Drum
  Overall Size: 168" L x 76" W x 73" High
 
-Exit 2 Arm Turnstile:
  59" Useable Arm Length
  C-Hook Type Arms
  5" W x 11.5" High C-Hook Slot
  Manual Rotation
  Passline: 49.5" from Floor to Top of Arms
  No Pushoff
  60" Dia. Base
  Overall Size: 142" L x 60" W x 49.5" High
 
-Main Operators Panel:
  Overall Size: 26" L x 24" W x 51" High
 
-Slitter Tooling:
 
-CMC Drive Panel:
  Overall Size: 36" L x 14" W x 62" High
 
-Main Hydraulic Power Unit:
  20 HP AC Motor
 
-Drawings Included:
  Mechanical/Electrical
  Foundation
 
-Spare Parts:
  Wichita Water Cooled Brake
  Motor for Hydraulic Power Unit
 
-Line Direction: Right to Left