2 Hi 1 Stand Lewis Rolling Mill

Brand
LEWIS

Model

Stock #
2220

Condition
Very Good

Year

Location
Toledo, Ohio
United States

Specifications

Equipped With

22" x 40" Non-Reversing Cold Mill
 
Coil Weight:               30,000 lbs. (13,500kgs)
Mill Speed:                309 to 618 FPM (90 to 190 mpm)
Post Size:                 13" x 15.50" (330 x 340 mm)
Window Dimension:          2' Wide x 6'-1.25" High  (610 W x 1855 H mm)
Mill Bearings:             Timken Roller
Main Mill Drive Motor:     200 HP, 575/1150 RPM, 230 V DC
 
Coil Information: 
 Width:  36" (915 mm)
I.D.:  20"  (508 mm)
O.D.:  60"  (1524 mm)
 
Consisting of the following:
 
-Payoff Reel: 
  Mfg: Loopco 
  Year:  1973
  Model:  1600
  Mandrel:  15.50" - 20" Dia. x 44" Face  (508 mm)
  Tension:  Wichita Water Cooled Brake 
  Features:  Holddown Roll, AC Thread Up Motor, Hydraulic Expansion,
              Sliding Base.
 
-Tension Reel: 
  Mfg:  Matteson 
  Year:  1976
  Mandrel:  20" Dia. x 44" Face with Hydraulic Expansion and Gripping (508 dia x 1117 mm face)
  Motor:  100 HP DC, 400/1200 RPM
  Gear Ratio:  9.69:1
  Features:  Coil Stripping with (2) - 4" Dia. x 45.50" Cylinders
  Overhead Holddown 
  Motorized Lube Pump
  Sliding Base
 
-(1) Coil Car: 
  Mfg:  Loopco 
  Year:  1973
  With 40" Platform 
  Hydraulic Coil Lift:  6" Dia. x 20" Cylinder 
  Motorized Car Travel through Chain Drive
 
-(2) Coil Turnstiles: 
  Mfg:  Loopco 
  Year:  1976
  Power Rotation 
  31" Arm Extension into Coil I.D.  (787 mm)
 
-Combination Gear and Pinion Drive: 
  Mfg:  D.O. JAMES, 1976
  Serial:  #255454
  Input Speed:  575/1190 RPM
  Rating:  288 HP at 575 RPM
  Pinion Centers:  22" (560mm)
  Motorized Lube Pump 
 
-(2) Spindles with Universal Couplings and Carrier
 
-Mill Stand:
  Mfg:  Original 
  Year:  1950, Altered - 1976
  2 Housings jointed by 39.50" Separator  (1000 mm)
  Electro-Mechanical Screwdowns
   Motors: 2 - 5 HP, 900 RPM, 220/440 V, 3/60 AC
   Screw Speed:  0.083" to 0.208" Per Minute 
   Screw Dia.:  7" (177 mm)
  Main Drive:  200 HP DC
 
-Mill Base: 
  Mfg.:  Waterbury Farrel, 1976 
  Welded Steel Construction
 
-Entry Deflector Roll with Peeler Table
 
-Exit Deflector Roll, Wiper and Carry Over to Tension Reel.
 
Available with Two Sets of Roll, Chocks and Roller Bearings.
 
Note:  SCR's and Control not available.