12" x 2.875" x 2,500# RUESCH Coil SLITTING LINE

Brand
Not Specified

Model

Stock #
1263

Condition
Used

Year

Location
City Not Specified,

Specifications

Equipped With


MATERIAL: ALUMINUM, BRASS, COPPER, STEEL

MAXIMUM THICKNESS: 0.125"

MINIMUM THICKNESS: 0.006"

MAXIMUM UNTRIMMED WIDTH: 13.75"

COIL WEIGHT - MAXIMUM: 2500#

COIL I.D. AT PAYOFF: 14.5" - 20.5"

COIL WEIGHT PER REWIND ARBOR: 1000# MAX.

MAXIMUM REWIND DIAMETER: 36" CONSISTING OF THE FOLLOWING:

-PAYOFF - AMERICAN STEEL LINE MODEL 60 S/N: 8654 4/90 CAPACITY: 2,500# x 20" WIDE EXPANSION RANGE: 14" - 21" MANUAL EXPANSION COIL OD: 54" MAX. 3 SEGMENT MANDREL 3 COIL KEEPERS EATON AIRFLEX BRAKE NON-MOTORIZED 35" PASSLINE HEIGHT -SLITTER HEAD: MODEL 149-83A N1989 3X S/N - 5322 NO. CUTS: 6 TO 8 IN 0.062" BRASS 4 IN 0.093" BRASS 2 IN 0.125" SOFT BRASS. CUTTER DIAMETER: 6" SPACER DIAMETER: 4" SLITTING ARBOR: 2.875" DIA. x 13.5" FACE WIDTH MAX. ENTERING STOCK: 13.75" WIDE OPERATING SPEED: 0 - 300 FPM MOTOR: 15 HP AJUSTO WITH DYNATORQ BRAKE JOG ACCELERATIONS STARTER AND PUSH BUTTON CONTROLS. (COMMON DRIVE FOR SLITTER HEAD AND TAKEUPS) ELECTRICS: 208 v/3 ph/60 hz -SLITTER WITH LINK GEARS AND ANTI-FRICTION BEARINGS (SAME AS N1780) -ENTRY TABLE WITH ROLLER SIDE GUIDES MANUALLY ADJUSTABLE (N1967 TABLE WITH SHOP MODIFICATIONS) -SINGLE TOP AND DOUBLE BOTTOM PRESSURE BARS FINGER SUPPORTS -ENTRY PASSLINE ROLL -STEEL STRIPPER RING ASSEMBLY. TOP AND BOTTOM 6.5" DIA. STEEL RINGS -IDLE EXIT PINCH ROLLS 2" DIA. x 14.5" FACE WIDTH (SHAFT EXTENDED FOR FUTURE DRIVE TO BOTTOM ROLL ONLY) -DOUBLE ARBOR ELECTRIC CLUTCH TAKEUP (LIKE N1804) DYNAMATIC CLUTCH ON EACH TAKEUP ARBOR WITH TOOTH TYPE DRIVE BELTS. -TAKEUP (RECOIL) ARBORS: (2) - 2.5" DIA. ARBORS (SIMILAR TO N1804) -TAKEUP (RECOIL) DRUMS: ONE (1) - 6" DIA. x 20" FACE, SOLID DRUM W/MATERIAL SLOT AND 14" DIA. BACKPLATE. 3" BORE ONE (1) - 6" DIA. x 22.5" FACE, SOLID DRUM WITH 14" DIA. BACKPLATE. 2.5" BORE ONE (1) - 8" DIA. x 15" FACE, MANUAL EXPANSION W/MATERIAL SLOT AND 16" DIA. BACKPLATE. 2.5" BORE -SCRAP WINDER NON-DRIVEN (CAN BE DRIVEN) -SLITTER TOOLING (KNIVES ONLY): 19 KNIVES - 0.187" WIDE 32 KNIVES - 0.125" WIDE -APPROX. SIZE OF SLITTER ONLY: 131" L x 65" W x 58" HIGH